Sarcoidosis in a dental surgeon: a case report
© Checchi et al; licensee BioMed Central Ltd. 2010
- Received: 20 January 2009
- Accepted: 10 August 2010
- Published: 10 August 2010
Although the causes of sarcoidosis are still unknown, past and current studies have provided evidence that this disease may be associated with occupational exposure to specific environmental agents. We describe a case of sarcoidosis in a dental surgeon with long exposure to inorganic dusts. To the best of our knowledge, this is the first report of this kind in the literature.
At the beginning of 2000, a 52-year-old Caucasian man, who worked as a dental surgeon, presented with shortness of breath during exercise, cough and retrosternal pain. After diagnosis of sarcoidosis, a scanning electronic microscopy with X-ray microanalysis of biopsy specimens was used in order to determine whether the disease could be traced to an occupational environmental agent. Results showed the presence of inorganic dust particles within sarcoidotic granulomas, and demonstrated that the material detected was identical to that found in a powder used by our patient for several years.
Although these results cannot be considered as definitive proof, they do however provide strong evidence that this disease may be associated with material used by dental surgeons.
- Angiotensin Converting Enzyme
- Energy Dispersive Spectrometer
- Tricalcium Phosphate
- Mediastinal Lymphadenopathy
Past and current studies suggest that environmental and occupational factors may be associated with increased risk of sarcoidosis. Sarcoidosis is a systemic granulomatous disease that primarily affects the lung and lymphatic systems of the body [1–3]. Although its causes are still unknown, different lines of evidence associate sarcoidosis with exposure of genetically susceptible hosts to specific environmental agents. The possible agents involved in the etiology of the disease include micro-organisms, organic and inorganic dusts such as aluminum, zirconium, talc , titanium and silicates. We present a case of sarcoidosis in which inorganic dust particles (silicate) were detected in biopsy material by means of scanning electronic microscopy (ESEM) tandem energy dispersive spectrometer (EDS), thus providing additional evidence that some cases of sarcoidosis may be due to occupational exposure to environmental agents.
At the beginning of 2000, a 52-year-old Caucasian man who worked as a dental surgeon and had never smoked, was referred to the our Occupational Health Unit, owing to shortness of breath during exercise, cough and retrosternal pain, which had become progressively evident in the months prior to admission. His medical history was unremarkable. Physical examination, pulmonary function tests and blood tests were within normal ranges. Chest X-ray showed bilateral hilar enlargement and suggested hilar lymphadenopathy secondary to sarcoidosis as a possible diagnosis. This possibility was supported by chest computed tomography (CT) scan, which revealed diffuse hilar and mediastinal lymphadenopathy with maximal lymph node diameter of 3 cm. Total body scintigraphy with gallium 67 confirmed the hilar and mediastinal lymphadenopathy. Bronchoalveolar lavage (BAL) showed an increase in total cell count and an elevated CD4/CD8 ratio compatible with sarcoidosis, and absence of neoplastic cells or infectious agents. Finally, cytologic examination of the aspirated bronchial material evidenced a non-caseating granuloma and first stage sarcoidosis was diagnosed. After lung examination, it was decided not to start any treatment and to evaluate the progression of the disease. Therefore, our patient was referred for follow-up.
Given the epidemiologic evidence on the role of occupational exposure in the etiology of sarcoidosis, a sample of the powder used by our patient in his work as a dental surgeon for at least 20 years in dental hygiene procedures was analyzed. Analysis was performed by electronic microscopy in the Laboratory of Biomaterial of the Department of Neurosciences, University of Modena and Reggio Emilia and identified the presence of silicates among components.
During the following three years, the clinical picture and chest CTs remained unchanged. Blood tests showed an increase of serum angiotensin converting enzyme (ACE) and GPT, whereas calcium remained within normal values. Hepatic echography was also normal. In 2003, our patient's dyspnea was seriously aggravated with episodes also occurring at rest; the chest CT performed in March 2003 revealed a bilateral increase in the number and volume of the affected mediastinal and hilar lymph nodes, whereas the remainder of the pulmonary parenchyma was normal. Consequently, treatment was initiated with cycles of cortisone, which produced visible improvement in the clinical picture, reduction of the lymphadenopathy on CT after seven months, and decline in serum ACE to within normal range. In 2006, while our patient's dyspnea remained under control with cortisone, CT showed progression of the disease with enlargement of the hilar and mediastinal lymphadenopathy and areas of interstitial thickening. Additional information about the possible origin of the disease was provided by SEM with X-ray microanalysis of biopsy specimens, which showed that the material found inside the sarcoidotic granulomas was identical to that found in the powder used by the dental surgeon for several years. Currently, our patient is working without using any dust for dental cleaning, his clinical picture is stable with daily cortisone treatment, and he is under periodic control.
The activity of dental surgeons is associated with airborne exposure to aerosols of biological material and inorganic substances. The instruments used during dental surgical procedures produce intense heat (electrocautery, laser) and such procedures usually produce fumes containing biological material (even partially incombusted). High-speed, air-driven dental hand-pieces, ultrasonic scalers, the polishing of composite and ceramic restorations and the use of the milling cutter on metallic prostheses disperse a large amount of aerosol and spatter including fine particulate matter . During the polishing and whitening of natural teeth, chemical compounds (composed by particles of sodium di-carbonate and tricalcium phosphate) are sprayed on the tooth surface detaching part of its enamel and dispersing microparticles in the environment, thus exposing patients and operators at risk of inhalation. For example, a standard hygiene procedure involves the use of prophylactic material and ultrasonic and/or manual instrumentation . The prophylaxis phase can be substituted by an artificial bicarbonate aerosol. Artificial cleaning aerosols are formed by a Mini-Clean device (Castellini, Bologna, Italy) with air pressure set at six to seven atmospheres and water flow at one atmosphere. Each individual run lasts 20 to 30 minutes for each patient. It has been reported that 95% of the particles measure less than five micrometers and are mainly concentrated within two meters of the patient where they can be easily inhaled by dental clinicians. For this reason, the patient always protected himself with a face mask (3 M ESPE 1942 F.B. (1800 NL) resistant molded face) whose level of efficiency was 90 to 92% [6, 7].
Although the relationship between dental material with silicates and sarcoidosis has not, to the best of our knowledge, been discussed in literature, these findings provide evidence that dental surgeons' occupational exposure to inorganic dusts might be a relevant factor in the onset of sarcoidosis. We think that similar cases should be reported in order to help identify environmental agents that could be involved in the pathogenesis of sarcoidosis.
Written informed consent was obtained from the patient for publication of this case report and any accompanying images. A copy of the written consent is available for review by the Editor-in-Chief of this journal.
- American Thoracic Society Statement on Sarcoidosis: Am J Respir Crit Care Med. 1999, 160: 736-755.View ArticleGoogle Scholar
- Newman LS, Rose CS, Bresnitz EA, Rossman MD, Barnard J, Frederick M, Terrin ML, Weinberger SE, Moller DR, McLennan G, Hunninghake G, DePalo L, Baughman RP, Iannuzzi MC, Judson MA, Knatterud GL, Thompson BW, Teirstein AS, Yeager H, Johns CJ, Rabin DL, Rybicki BA, Cherniack R, ACCESSResearch Group: A case control etiologic study of sarcoidosis: environmental and occupational risk factors. Am J Respir Crit Care Med. 2004, 170: 1324-1330. 10.1164/rccm.200402-249OC.View ArticlePubMedGoogle Scholar
- Gorham ED, Garland CF, Garland FC, Kaiser K, Travis WD, Centeno JA: Trends and occupational associations in incidence of hospitalized pulmonary sarcoidosis and other lung diseases in Navy personnel: a 27-year historical prospective study, 1975-2001. Chest. 2004, 126: 1431-1438. 10.1378/chest.126.5.1431.View ArticlePubMedGoogle Scholar
- Gross KB, Overman PR, Cobb C, Brockmann S: Aerosol generation by two ultrasonic scalers and one tonic scaler: a comparative study. Journal of Dental Hygiene. 1992, 66: 314-318.PubMedGoogle Scholar
- Legnani P, Checchi L, Pelliccioni GA, D'Achille C: Atmospheric contamination during dental procedures. Quintessence International. 1994, 25: 435-439.PubMedGoogle Scholar
- Legnani P, Leoni E, Lipparini M, Checchi L, Pelliccioni GA: Contaminazione aerea. Dispositivi individuali di protezione. Dental Cadmos. 1999, 5: 25-33.Google Scholar
- Checchi L, Montevecchi M, Moreschi A, Graziosi F, Taddei P, Violante FS: Efficacy of three different masks in preventing inhalation of airborne contaminants in dental practice. JADA. 2005, 136: 877-882.PubMedGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.